– Allows you to turn any wired AHD cameras into digital wireless cameras
– Transmits video signal up to 50~100Meter. with a good line of sight interference free
– Both transmitter and receiver are weatherproof
-Only for AHD1080P /720P, CVI, TVI
-Up to 2mp resolution suitable;.
– Wireless transmitter and receiver for CCTV camera
– Max resolution 720p / 1080p
– Strong signal 50~200 meter range in sight
– Ideal for connecting a security camera yourself
– Ideal for use where cable pulling is not possible
– Unique product that can transmit AHD, CVI and TVi signals (no analog)
– Can also be connected to a DVR security recorder
Connecting to a recorder
If you want to connect this transmitter and receiver to a recorder, you also need an RCA to BNC connector.
Type: transmitter / receive
Operating voltage: DC12-36V
TX consumption: 200mA / 250mA max
RX consumption: 200mA
RF bandwidth: 12 Mbps
Tx channel: 1 channels
Working range: 200 meters
Jump Speed: 1200 / S
Boot Time: 2 S
Latency: 100 ms maximum
Video codec: H.264
T / R Frequency: 2400-2483.5 Mhz
Output power: 20 dB
Receive Sensitivity: -86 dBm @ QPSK
Video TX in signal format: AHD / TVI / CVI / CVBS @ 1080P / 720P / 480P automatic detection
RX video output signal format: AHD / TVI / CVI / CVBS @ 1080P / 720P automatic detection
Video output impedance: 75, typ.
Video output level: 1Vp-p, typ.
Audio output impedance: 200, typ.
Audio output level: 5mv ~ 0.2Vp-p, typ.
Signal to Noise Ratio (340 Hz ~ 3.4 kHz): 63 dB, minimum
THD: 5%, max.
Housing material: die-cast aluminum
Power consumption: 200mA / 12V
Operating temperature: -20 ° C ~ 80 ° C
Operating humidity: 85% RH