3Rd Brake Light Mount Rear View Camera For VW Caddy 2003-2015

3rd Brake Light Mount Rear View Camera for VW Caddy 2003-2015

 

Model NO.:LC-009C3-2 

Features:  

-- Reverse camera especially for use on transporters;
-- High Resolution 600~700TVL CMOS sensor;

--Resolution:976(H)×592(V)
-- 130 degree viewing angle;
-- LED light board built-in;
-- CE,FCC,RoHS,E-mark E9 Certification;
-- Easy exchange against the factory-side 3rd brake light glass;
-- Usable with all monitors, which have an RCA video input;
-- High quality workmanship & visually appealing design;

--HD Night vision & Waterproof ,8 IR LEDs with light sensor for night mode 

Specifications of VW Caddy 2003~ 2015 Camera:  

Type	VW Caddy 2003-2015 brake light camera
Sensor	1/3 CMOS 3089		1/3 PC1058 CMOS
Resolution:	720(H) x 480(V)		976(H)×592(V)
TV line	600		700
Lens:	1.7mm		1.7mm
Min illumination:	0Lux (LED ON)		0Lux (LED ON)
IR led:	/		/
Night Vision distance:	20ft		20ft
Waterproof	IP68		IP68
View angle:	170°		170°
Power voltage:	12V		12V
Operation Temp.:	-20°C~+70°C		-20°C~+70

 

 

Note: 

This reversing camera is specially developed for use on VW Caddy. The well-known problem: on vehicles with rear doors can not be readily fitted rear view camera. it now uses a conventional configuration camera can indeed align them down, but the rear of many vehicles extends upward slightly round about. A normal reversing camera would capture this curvature and thereby obscure the trailer coupling, the footboard or the bumper.

The rear view camera specifically integrated into the 3rd brake light lens allows, the view of the curvature and thus acquires the entire back wall, bumpers etc. Only this precise maneuvering possible, especially if it is only a few centimeters.

 

Estimate takes 1~1.5 hour to mount this camera. 

 

 

 

VW Caddy Camera packing detail: 

 

1x Camera for VW Caddy van;

1x Extension cable 10m; 

1x RCA to 4-Pin connector cable; 

1x DC Power wire;

 

 

 

 

 

Related Products