Contact

We're always here for you, tell us how can we help?

Wired heavy duty night vision bracket camera system displays camera view when vehicle is in reverse. Wired Color Night Vision Camera is designed to be installed practically anywhere on a vehicle or trailer. This system is designed for large heavy duty trucks and vehicles and RV’s. This system also includes a 7” LCD with heavy duty windshield bracket that can be installed on windshield or dash. When the camera powers on, the LCD will display what is behind the vehicle. This camera includes 15pcs IR LED each lens night vision LED lights that will illuminate at night giving the driver good visibility at night. This system is designed for trucks, commercial trucks, RV,s buses and more.

 

This twin lens reversing camera is made specially for Reversing Cameras. Its key features include a stainless steel bracket, Sharp or Sony 1/3″ CCD sensors, small 8mm connectors to aid fitting and a narrow 45 degree lens for always on rear view with a 120 degree lens for reversing. This matches our monitors with high resolution digital screens perfectly, giving good colours during the day time and an excellent night view. With night vision the reversing camera will benefit from the Infra Red LEDs. They will provide enough illumination to reverse in almost all situations. The always on lens however will need some illumination from street lighting. In the middle of the country with no background light they will struggle. Similar cameras on the market will not match this specification.

This heavy duty trailer link is for use on HGV where the signal from 2 cameras mounted on the trailer need to be linked to the monitor in the cab. It uses our standard 4 pin connectors and matches all our 4 pin cables. You add the length of cables required to each socket. The coil is 0.7m and stretches easily to 3m. This is the latest version of the cable which now has 2 shielded cores running through the coil. This ensures there is no “cross talk” betwee the 2 channels improving the picture quality.

 

Specification

Monitor:

  • 7″ 16:9 TFT Colour LCD Widescreen Format
  • Resolution: 800×480 digital
  • 2 Video Inputs (2-CH AHD, 1-CH CVBS optional)
  • One way audio input
  • Button with a green backlight
  • Remote Control, OSD Menu
  • Contrast, Colour, Brightness adjustable
  • Language support:English, French, Russian, Spanish, Portuguese, German, Italy.
  • With Sunshade design to avoid sun glare.
  • Can connect to DVD/MP4/Camera etc
  • Mirror/Normal View Switch:
    The monitor controls the camera view between a mirror image and a normal image. This allows the connected cameras to be used either as backup or forward-facing cameras.

 

Camera:

–IP68 Waterproof Rating
–With 15pcs IR LED each lens, the backup camera will be able to see up to 50ft even in complete darkness! This night vision will be even without any ambient light at all.

–Better picture clarity, color contrasting and sharpness

–Heavy duty hard metal cased with 6.8G-force rated shock resistant

–Waterproof and Mudproof

–Camera angles quoted are a calculated measurement based on the focal length of the lens and size of sensor. They are given as a diagonal measurement. When a camera displays on a monitor there is a certain amount of cropping to get the picture to fit. To overcome these issues we have measured the horizontal camera angle with the camera image displayed on a 7″ high resolution screen. The angle given may be subject to change between batches so if it is critical then please ask us to double check. When comparing with other web sites please remember the camera angles are often exagerated.

Our measured horizontal camera angle for the narrow angled lens is 35 degrees and 85 degrees for the wide angled lens.

Notice: This camera works very well at night. Don’t put it close to your windshield. There will be too much glare from the IR lights.